FLOAT LEVEL SWITCHES TO START/STOP PUMPS

The BIP STOP and AT float level switches have been designed for the automatism of pumps (start/stop) and water shortage or high level alarms with one single device.

These floats simply open or close the pump’s power supply circuit either directly or through a relay. The distance between the float and the cable fixed to the pump sets the regulation height, and can vary depending on models. For the BIP STOP for instance a maximum distance of 1.50 m. is recommended.

Several types of ballasts and cable clamps are available in option. For more information, please click on «Accessories».

• Standard and economical float level switch ideal to start/stop small cellar pumps even in certain agressive liquids.
• Big 110º switching differential that prevents excessive jerking of the pump's engine
• Neoprene or HR HY (hypalon) 3x1mm2 cable or neoprene 2x1mm2 cable, both H07RN8-F certified
• Available in 6 versions: Emptying/Filling (VR) – Filling (R) - Emptying (V) – Emptying + Ground (VT) – Filling + Ground (RT) and "Special" Emptying with multiplug (VS).

• A little bigger than the Bip Stop, the AT is a float level switch that can withstand intensive use in heavily loaded liquids.
• It has also a bigger switching differential of 120º that prevents jerking of the pump.
• Neoprene or HR HY (hypalon) 3x1mm2 cable or neoprene 2x1mm2 cable, both H07RN8-F certified
• Available in 6 versions: Emptying/Filling (VR) – Filling (R) - Emptying (V) – Emptying + Ground (VT) – Filling + Ground (RT) and "Special" Emptying with multiplug (VS).

• This float level switch is identical to the AT 120 but is encased in a HR HY (hypalon) press-vulcanised housing, just as the SOBA HR HY.
• 120º switching differential that prevents excessive jerking of the pump's engine
• HR HY (hypalon) 3x1mm2 H07RN8-F certified cable
• Especially designed for the chemical industry. Good for acids, petrol products, and diverse corrosive liquid mextures.  

• Due to its big switching differential of 165º, the AT 165 can replace 2 standard float level switches in very agitated liquids and perform an accurate level regulation.
• Neoprene or HR HY ( hypalon) 3x1mm2 H07RN8-F certified cable
• Connected with or without a relay, the AT 165 is suitable for all pumps in very agitated liquids. It is indeed the most economical solution.

• ACS certified float level switch for use in drinking water meant for human consumption. This float has a 165º switching differential and has been specially designed for applications involving very agitated waters, thus protecting the pump’s engine and avoiding any jerking.
• Application examples: Tanks and reservoirs of drinking water, etc.
• Special EPDM 3x1mm2 A07RN8-F certified cable
• To know more about the ACS certificate.
• To download the sales flyer of our ACS certified floats, please click here